Yes, it is necessary for the SolarFlow 800 Plus to be connected to Wi-Fi and the Zendure App. The Zendure App is used for system settings, mode selection, and remote monitoring. Please ensure that the device is connected to a Wi-Fi network to achieve ...
Smart Matching Mode is a Cloud-base feature, so you need to keep the SolarFlow and the ‘sensor’ devices have stable Wi-Fi connections all the time. Smart Matching Mode Introduce the function of Smart Matching Mode and its advantages and ...
It supports Zendure AB1000/AB2000/AB1000S/AB2000S/AB2000X batteries. You can mix AB1000 and AB2000 series batteries, with up to 5 additional stacked units, for a total capacity of up to 11,520Wh.
Smart CT Mode is a Cloud-base feature, so you need to keep the SolarFlow and the ‘sensor’ devices have stable Wi-Fi connections all the time. Smart CT Mode Introduce the function of Smart CT Mode and its advantages and disadvantages Smart CT Mode is ...
This warranty is only available to customers who purchased from Zendure’s official websites, Zendure Amazon stores or any Zendure authorized retailers. Parties wishing to participate in the Warranty Program must abide by the procedures and ...
Smart CT Mode is a Cloud-base feature, so you need to keep the SolarFlow and the ‘sensor’ devices have stable Wi-Fi connections all the time. Smart CT Mode Introduce the function of Smart CT Mode and its advantages and disadvantages Smart CT Mode is ...
1. We recommend setting the discharge limit to 10% to prolong the lifespan of your device. 2. It is advised to set the action of the device to "Shutdown" after reaching the discharge limit. You can do this on the same page of the App. 3. In case of ...
Automatic calibration refers to battery capacity calibration (full charge/full discharge), which aims to ensure the accuracy of battery capacity data and guarantee the operation precision of the equipment.
AC charging power (drawing from the home grid) = Battery charging power set in the App (not exceeding 3000W) + Off-grid socket output power. The total of the two shall not exceed 3680W.
The off-grid AC port is disabled by default. There are two activation methods: ① Enable it through the Zendure App; ② In scenarios without network or App, press the power button twice consecutively to manually switch on/off locally.