My Tesla and heat pump are not under the same electric meter, can the control be completed?
The main CT must be connected to the main electric box, and the sub electric box can be connected to the sub CT.
However, the circuits of Tesla and the heat pump must finally converge to the main electric box. If they are two completely
different electric boxes, load scheduling cannot be realized.
Popular Articles
Warranty Terms & Conditions (US)
This warranty is only available to customers who purchased from Zendure’s official websites, Zendure Amazon stores or any Zendure authorized retailers. Parties wishing to participate in the Warranty Program must abide by the procedures and ...
How to use Smart CT Mode
Smart CT Mode is a Cloud-base feature, so you need to keep the SolarFlow and the ‘sensor’ devices have stable Wi-Fi connections all the time. Smart CT Mode Introduce the function of Smart CT Mode and its advantages and disadvantages Smart CT Mode is ...
Can AB1000 and AB2000 be used together?
Yes, in configurations of up to four batteries total. For example, three AB1000s and one AB2000 can be used together.
What is the operating temperature of the AB1000/AB2000?
Charging temperature: 0-45 degrees Celsius for AB1000/ -20-45 degrees Celsius for AB2000, Discharging temperature: -20-45 degrees Celsius.
How to maintain the battery in winter
1. We recommend setting the discharge limit to 10% to prolong the lifespan of your device. 2. It is advised to set the action of the device to "Shutdown" after reaching the discharge limit. You can do this on the same page of the App. 3. In case of ...
Recent Articles
Can I set the "required runtime for each startup" for smart plugs?
Yes, set "Runtime required for each startup" in the Zendure APP to ensure the device operates for a sufficient duration after startup to achieve the expected effect.
When the "Dynamic Load Management" logic is triggered, what steps does the system follow for load control?
① Maintain currently active smart plug loads to ensure the minimum operating time is met; ② Reduce the charging power of Tesla vehicles and the operating power of heat pumps; ③ If the total power consumption is still too high, turn off smart plug ...
How to set the usage plan of the heat pump?
1. On the Hems interface, click 【Home】 to enter 【Home Settings】, and select 【Load Control】 to enter the page. 2. Then click 【Load Settings】, find 【Usage Plan】 in the load configuration and click 【Add Time Plan】. 3. A setting window will pop up, the ...
If there are both a heat pump and a Tesla, which one is charged first?
The user can drag to adjust the load priority for custom sorting on the 【Load Control】 page, and the device with a higher priority will obtain power distribution first.
How to start the heat pump in load scheduling?
The user must complete the addition of the load devices to be scheduled in the App and add the power consumption plan for the added devices. If only the devices are added but no power consumption plan is added, the load scheduling cannot be started.