Does EVFlow AC support direct data communication with the vehicle via the charging cable to directly read the vehicle's SOC status?
No. The current hardware does not support direct digital data communication with the vehicle via the charging cable.
Therefore, the system cannot automatically read the actual real-time SOC from the vehicle BMS at the physical hardware layer over the charging cable.
Related Articles
When the vehicle's SOC status cannot be obtained directly, what alternative solution does the APP provide to assist the system in planning the intelligent charging schedule?
Due to hardware constraints in retrieving vehicle SOC directly, Phase 1 software supports a "manual input" workaround: the App allows users to manually specify the target energy (in kWh) to be added in the Load Control page of HEMS. Based on this ...
Which vehicles are compatible with EVFlow AC?
EVFlow AC is compatible with battery electric vehicles (BEVs) and plug-in hybrid electric vehicles (PHEVs) that support Type 2 AC charging. Before purchasing, please check your vehicle’s charging connector, supported AC charging power, and phase ...
Can EVFlow AC schedule charging based on solar generation forecasts?
Yes. When integrated with Zendure HEMS 2.0 and properly configured, EVFlow AC can schedule charging based on solar generation forecasts and EV charging demand to improve solar energy utilization. Actual charging schedules may still be affected by ...
Does EVFlow AC currently support Vehicle-to-Home (V2H) bidirectional charging?
No. Bidirectional power features such as V2H are part of future development plans and are not currently available as standard charging functions. Future availability will depend on official feature releases, vehicle compatibility, and supporting ...
Which charging authentication/start modes does EVFlow AC support?
It supports Plug & Play (charging starts immediately upon plugging in) and Non-Plug & Play (charging requires external authentication via RFID card, Cloud, or the App).
Popular Articles
How to use Smart CT Mode
Smart CT Mode is a Cloud-base feature, so you need to keep the SolarFlow and the ‘sensor’ devices have stable Wi-Fi connections all the time. Smart CT Mode Introduce the function of Smart CT Mode and its advantages and disadvantages Smart CT Mode is ...
Can AB1000 and AB2000 be used together?
Yes, in configurations of up to four batteries total. For example, three AB1000s and one AB2000 can be used together.
What is the operating temperature of the AB1000/AB2000?
Charging temperature: 0-45 degrees Celsius for AB1000/ -20-45 degrees Celsius for AB2000, Discharging temperature: -20-45 degrees Celsius.
How to maintain the battery in winter
1. We recommend setting the discharge limit to 10% to prolong the lifespan of your device. 2. It is advised to set the action of the device to "Shutdown" after reaching the discharge limit. You can do this on the same page of the App. 3. In case of ...
Why is my Hub’s battery light(AB1000 LED) turned off even though I have a battery connected to it?
Check the battery status page of the Zendure App to see if all your connected batteries are recognized by the system. If no batteries are recognized, please contact support@zendure.com for further assistance. Please include a picture of the Zendure ...
Recent Articles
EVFlow AC Installation Official Tutorial Video
EVFlow AC Official Video installation link: https://www.youtube.com/watch?v=QQ4JOUNW-30
What is EVFlow AC?
EVFlow AC is a smart AC home EV charger provide 3 versions (7.4 kW, 11 kW, and 22 kW) When integrated with Zendure HEMS 2.0,it coordinates solar power, home energy storage, electricity tariffs, and household load management to optimize EV charging.
How should I clean and maintain EVFlow AC
Inspect the charger, charging cable, and connectors for wear or damage approximately every six months. Before cleaning, disconnect the upstream power supply. Use a soft, slightly damp cloth to clean the enclosure. Do not use high-pressure water jets, ...
What should I do if charging does not start after plugging in the connector or the red fault indicator appears?
First, check the following: Ensure the charging connector is fully inserted. Confirm that charging authorization has been completed. Check whether the vehicle or Zendure App has an active charging schedule limit. Verify that the selected charging ...
How can I identify the device status from the indicator light?
Under normal operating conditions, green indicates online status, while blue indicates offline status. A solid light indicates standby mode, while a breathing light indicates that charging is in progress. When the breathing light changes to a solid ...