After the charging pile completes the basic power distribution network configuration, how to guide it to join the Home Energy Management System (HEMS)?
1. If an existing HEMS has already been created under the user's App account, the interface guides the user to select that system and add the charger as a load device, then complete setup or dismiss the prompt.
2. Notice: Creating a brand-new HEMS profile is not supported within the charger's initial network pairing flow.
Related Articles
Can I use solar energy stored during the day to charge my EV at night?
Yes. This requires a compatible home energy storage system and appropriate energy management settings to coordinate battery discharge and EV charging. The available charging energy and power depend on the storage capacity, remaining battery charge, ...
What equipment is required for Solar Surplus Charging?
Solar Surplus Charging requires a solar PV system, EVFlow AC, and a compatible smart meter or CT metering solution to monitor real-time power at the home's grid connection point. The energy management configuration should also be completed. Home ...
What is the system coordination and green power data acquisition logic of the photovoltaic surplus power charging (Eco Charge) mode?
Solar Surplus Charging relies on a smart CT or smart meter reader compatible with the Zendure App to periodically monitor and report the grid export power (surplus green power) from the main distribution panel to the charger's master MCU in real ...
Will my previously configured charging schedules, electricity tariff settings, and solar surplus charging modes still work after adding EVFlow AC to HEMS?
No. Once EVFlow AC is managed by HEMS, its standalone charging modes are disabled. HEMS takes over charging control and schedules charging according to the home's energy management strategy. However, you can enable Fast Charging Mode from the ...
After the charging pile is connected to HEMS, what is the execution priority of the system's internal scheduling when the user activates both "Charging Pile Usage Time" and "TOU Mode" at the same time?
The internal dispatch priority is fixed as: Charger Use Time > Solar Surplus > Low Tariff. The system only permits charging during the designated charger use time window, prioritizing surplus solar power first and low-tariff grid power second. If ...
Popular Articles
How to use Smart CT Mode
Smart CT Mode is a Cloud-base feature, so you need to keep the SolarFlow and the ‘sensor’ devices have stable Wi-Fi connections all the time. Smart CT Mode Introduce the function of Smart CT Mode and its advantages and disadvantages Smart CT Mode is ...
Can AB1000 and AB2000 be used together?
Yes, in configurations of up to four batteries total. For example, three AB1000s and one AB2000 can be used together.
What is the operating temperature of the AB1000/AB2000?
Charging temperature: 0-45 degrees Celsius for AB1000/ -20-45 degrees Celsius for AB2000, Discharging temperature: -20-45 degrees Celsius.
How to maintain the battery in winter
1. We recommend setting the discharge limit to 10% to prolong the lifespan of your device. 2. It is advised to set the action of the device to "Shutdown" after reaching the discharge limit. You can do this on the same page of the App. 3. In case of ...
Why is my Hub’s battery light(AB1000 LED) turned off even though I have a battery connected to it?
Check the battery status page of the Zendure App to see if all your connected batteries are recognized by the system. If no batteries are recognized, please contact support@zendure.com for further assistance. Please include a picture of the Zendure ...
Recent Articles
EVFlow AC Installation Official Tutorial Video
EVFlow AC Official Video installation link: https://www.youtube.com/watch?v=QQ4JOUNW-30
What is EVFlow AC?
EVFlow AC is a smart AC home EV charger provide 3 versions (7.4 kW, 11 kW, and 22 kW) When integrated with Zendure HEMS 2.0,it coordinates solar power, home energy storage, electricity tariffs, and household load management to optimize EV charging.
How should I clean and maintain EVFlow AC
Inspect the charger, charging cable, and connectors for wear or damage approximately every six months. Before cleaning, disconnect the upstream power supply. Use a soft, slightly damp cloth to clean the enclosure. Do not use high-pressure water jets, ...
What should I do if charging does not start after plugging in the connector or the red fault indicator appears?
First, check the following: Ensure the charging connector is fully inserted. Confirm that charging authorization has been completed. Check whether the vehicle or Zendure App has an active charging schedule limit. Verify that the selected charging ...
How can I identify the device status from the indicator light?
Under normal operating conditions, green indicates online status, while blue indicates offline status. A solid light indicates standby mode, while a breathing light indicates that charging is in progress. When the breathing light changes to a solid ...